BACK
 HomeCountertops ~ Under Sink ~ Appliance Filters ~ Whole House Systems ~ Shower Filters

Shop with CONFIDENCE at ESD ~ Your Abundantly Secure Order Gets Personal Attention

Softners
Standard with timer valve for resin regeneration 
gota.jpg (727 bytes) Available with demand regeneration valve
gota.jpg (727 bytes) Brine tank is included
gota.jpg (727 bytes) Hi-Capacity resin
gota.jpg (727 bytes) Bypass valve included
gota.jpg (727 bytes) Standard 1" connections
gota.jpg (727 bytes) Removes calcium and magnesium (hardness) from water
gota.jpg (727 bytes) Larger systems available on request
gota.jpg (727 bytes) 5 year warranty
gota.jpg (727 bytes) Installation by qualified/licensed plumber recommended

   
 AmericasBest.com Top 10 Site
Listed as
ESD Water Treatment

Click HERE for our "Water Softener Sizer." Know what size softener you need.

[Item Image]
Shown with optional IL7 carbon pre-filter (on the right)
PLACE YOUR ORDER
FREE SHIPPING!
Applies to Lower 48 USA Orders Only

Qty:   30,000 Grain Softener: $939.00
Qty:   45,000 Grain Softener: $1,065.00
Qty:   60,000 Grain Softener: $1,325.00

with IL7 in combo: add $526.00 (10% volume discount saves $59.00 off unit price)
with IL9 in combo: add $708.00 (10% volume discount saves $79.00 off unit price)

Or Call for a FREE 15 min.
Water Treatment Consultation
Or to Order by Phone:
1-304-721-8380
Weekday Afternoons until 8PM Eastern



 
M2010
M2012 M014
Maximum capacity (grains per recharge): 30,000 grains 45,000 60,000
Minimum Capacity (grains per recharge) 20,000 grains 30,000 40,000
Salt required per max. recharge (lbs) 15 22 1/2 30
Salt required per min. recharge (lbs) 6 9 12
Mineral tank size (fiberglass) (inches) 9 x 48 10 x 54 12 x 52
Brine tank size (linear polyethylene) (inches) 18 x 40 18 x 40 18 x 40
Salt storage (cap. lbs) 400 400 400
Service flow rate (G.P.M.) C/P 8.8 / 11 10/13 10/13
Backwash flow rate (G.P.M.) 2.2 2.7 4
I.P.S. pipe size (inches)*** 3/4 or 1 3/4 or 1 3/4 or 1
Maximum height (inches)*** 56 62 56
Floor space required (inches) 18 x 32 18 x 33 18 x 35
Type of mineral Hi - Capacity Polystyrene Resins
Aprox. shipping wt. (lbs)
110
130
190
       
Note: TDS, application, and flow rates will influence the performance of the system

C = Continuous        P = Peak

Pressure drop at flow rates listed is less than 15 PSI.
Units will handle 1 PPM Clearwater Iron-Use Iron Filter on Larger Armounts

* All units are shipped from factory set at minimum capacity and minimum salt usage to afford a 40% salt savings. Use the minimun capacity when sizing the installation to gain salt saving advantage.

** Allow additional headroom of 7-1/2 inches to remove cover of "TT" models


Home ~ Water Filters